Commercial Chemical Dosing
PoolMasters.
Automated systems ensure the condition of the pool water is kept clean and healthy by constantly monitoring the pH and free and/total chlorine.
The pH level is important, because the efficiency of the sanitiser is related to the pH level. If you use chlorine as a sanitiser and the pH goes over 7.8, the chlorine will lose about 80% of its efficiency.
Under the some state health regulations, pools that are required to use an automated system include pools in hotels, motels and other accommodation, clubs, workplaces, schools, holiday units and hospitals. Non-compliance with the new regulations can result in penalties of up to $17 000 for an individual or $85 000 for a corporation.
Waterco’s Chemflo Pro can provide a reliable automated dosing solution for commercial applications such as public pools.
Chemflo Pro Chemical Doser
The Chemflo PRO is a compact electronic communication and control system, designed for use with many different measuring sensors.
Chemflo PRO is a top of the range instrument controller equipped with the capability to connect up to four sensors of any type with appropriate analogue outputs and relays. Equipped with data logging as standard and multiple PID loops as options, the Chemflo PRO can control complex water treatment processes at a fraction of the cost of other controllers.
-
Chemflo PRO is a top of the range instrument controller equipped with the capability to connect up to four sensors of any type with appropriate analogue outputs and relays. Equipped with data logging as standard and multiple PID loops as options, the Chemflo PRO is able to control complex water treatment processes at a fraction of the cost of other controllers.
• Free chlorine, total chlorine and hydrogen peroxide reading through amperometric sensors. Chlorine range goes from 0.05 to 10.00ppm and hydrogen peroxide from 5 to 500 ppm
• Open overflow flow cell for sensors
• Superior patented gel-filled glass pH electrode
• Large easy to read colour LCD screen
• Capabilities for 4 inputs (expandable up to 16) and 4 outputs (expandable up to 16)
• Optional Remote communication
• Optional VSD pump controller
• Includes dosing pumps for sanitiser and pH control
• Mounted on backboard
Remote Communication
Optional 3G Communication module available. Alternatively, if your facility has a LAN (Local Area Network) and it can access the internet then you don’t need a modem, just an optional LAN card is required.
• Full read and write remote access from any computer, tablet or phone
• No software to install
• Cloud-based data storage and analysis tools
• Email data logs and alarms
• SMS text alarms
• Multiple security level login
Key Features
-
Free chlorine, total chlorine and hydrogen peroxide reading through amperometric sensors. Chlorine range goes from 0.05 to 10.00ppm and hydrogen peroxide from 5 to 500 ppm
-
Open overflow flow cell for sensors
-
Superior patented gel-filled glass pH electrode
-
Large easy to read colour LCD screen
-
Capabilities for 4 inputs (expandable up to 16) and 4 outputs (expandable up to 16)
-
Optional Remote communication
-
Optional VSD pump controller
-
Includes dosing pumps for sanitiser and pH control
-
Mounted on backboard
Remote Communication
Optional 3G Communication module available. Alternatively, if your facility has a
LAN (Local Area Network) and it can access the internet then you don’t need a
modem, just an optional LAN card is required.
-
Full read and write remote access from any computer, tablet or phone
-
No software to install
-
Cloud-based data storage and analysis tools
-
Email data logs and alarms
-
SMS text alarms
-
Multiple security level login
Sensors
Chemflo PRO is able to use amperometric sensors to measure the concentrations
of Free Chlorine, Total Chlorine, Chlorine Dioxide and Hydrogen Peroxide.
The sensor transforms an electrical signal into a concentration value that can be easily read by the operator.
Each sensor is supplied with:
-
Sensor
-
Membrane cap
-
100 ml bottle of electrolyte
-
1 piece of abrasive emery paper
-
Signal cable
The sensors are sensitive to changes in water flow and pressure. Therefore they
need to be placed in a circulation loop that ensure a consistent and steady values
of water flow and pressure.
Open Overflow Cells (double/triple)
The open overflow cell is designed to allow the sensors to be housed in a sample
of water at constant flow and pressure. Each controllers is provide with its
corresponding overflow cell.